Module 1 - Getting Started with OpenStudio
Module 2 - Building the 3D geometry: spaces & building envelope
-
Create 3D Geometry; The building and Spaces (5:22)
-
1. Installation and OpenStudio Resources (5:22)
-
2. OpenStudio Set up (21:06)
-
3. Import/Export & OS's Inheritance hierarchy method (23:27)
-
4a. Create Geometry - standard shapes method (31:33)
-
4b. Create Geometry - create spaces from diagram (footprint) method (39:02)
-
5. Assign properties and attributes (27:12)
-
6. Shading and daylight controls (27:05)
Module 3: Define space properties: space loads & schedules
-
1. Introduction to Work flow, weather data & library (23:59)
-
2. Life Cycle Cost analysis & Utility bills for Calibration (19:56)
-
3. Create & Edit Schedules (32:47)
-
4. Create & edit Construction sets (envelope) (38:59)
-
5. Internal Loads (18:40)
-
6. Space Types (2 videos) (20:21)
-
7. Facility & Building (10:50)
-
8 Spaces & envelope (13:57)
Module 4 - (OpenStudio Measures - IMP)
Module 5 - Zone HVAC equipment & thermostats)
Module 6 - Air Loops
Module 7 -Water based systems, troubleshooting, HVAC measures and post-processing
-
1. Air loops with water coils (11:08)
-
2. Hot water loop (9:56)
-
3. Chilled water loop (7:21)
-
4. Condensing water loop (10:43)
-
5. Results summary, debugging and simulation settings (10:34)
-
6. HVAC measures (MAGIC) (10:37)
-
7. Domestic hot & cold water (16:54)
-
8. Troubleshooting and post processing (14:13)
Module 8 - Complex and high performance HVAC systems
Module 9 - Parametric Analysis Tool (PAT)
